- Business Cards
- Hang Tags/Coupons/Info Cards
- Stickers
- Envelopes
- Promotional Materials
- Packaging
- Other Products
- Support
| Quantity | Unit Price | Total |
|---|---|---|
| 1sheets | ₩ 9,240 | ₩ 9,240 |
| 5sheets | ₩ 3,212 | ₩ 16,060 |
| 10sheets | ₩ 2,464 | ₩ 24,640 |
| 20sheets | ₩ 1,887 | ₩ 37,730 |
| 30sheets | ₩ 1,632 | ₩ 48,950 |
Prices shown exclude VAT and may vary depending on finishing options.
Cut stickers produced through large-format wide-format printing. Manufactured on waterproof, high-durability materials such as PVC, clear PET, and synthetic paper (Yupo), available in rectangle-cut or die-cut formats.
Large-format printed stickers cut to custom shapes. Suited to store interiors, signage, and large-scale branding.
For outdoor use, synthetic paper stands up to wind and rain, keeping colors intact over the long haul. Its polymer base resists UV, so it's well suited to outdoor signs and event labels.
Gloss coating brings out vivid, punchy colors that grab attention. Its smooth sheen makes photos and color-rich designs look crisp and sharp.
Gray synthetic material for large-format stickers. Opaque waterproof sticker.
Keep at least 2mm (0.08 inch) between the die line and safety zone.
Keep at least 2mm (0.08 inch) between the bleed and die line.
More bleed is always better.
More is better than less.
Add 2mm (0.08 inch) bleed beyond the die line on all sides.
→ Bleed area: 64×54mm (2.52×2.13 inch) (2mm margin per side)
→ Safety zone: 56×46mm (2.20×1.81 inch) (2mm margin per side)
All strokes except die lines must be converted to fills (Outline Stroke).
For small rounded stickers with any side shorter than 20mm:
You can find more detailed guides on coating, finishing, and other options on the order page.
Go to Order Page →Wide-format UV and solvent printing is the most suitable method for outdoor applications. Although guarantees cannot be provided, color retention typically lasts at least one year.
Wide-format printing supports significantly larger sizes than offset. Please refer to the order page for exact maximum dimensions. It is well-suited for large-format orders such as vehicle wraps and signage.
White ink printing is supported in wide-format. Color density tends to be greater than in offset. For orders requiring sharper definition, a double white pass is recommended.
Wide-format has limitations in fine text reproduction compared to offset. Due to ink-dot characteristics, text below 4–5pt may suffer from reduced legibility. Prior verification is recommended.
Offset offers superior color precision and high-volume production, but its weather resistance is limited. Wide-format excels in outdoor, large-format, and weather-resistant applications and supports small-batch orders. Please select according to the intended use.
UV ink is applied to the material surface and cured by UV light, forming a layered build-up. Solvent ink partially dissolves the surface, allowing penetration and bonding. UV provides superior fade resistance and lower VOC emissions, making it the recommended choice for long-term outdoor display (two or more years). Solvent excels in color density and cost efficiency, making it well-suited for short-term campaign orders.
Sizes exceeding the print width (typically 1,300–1,600mm) cannot be produced as a single sheet. Installation requires approximately 1cm of seam overlap, so the order must be divided into two or more sheets at the order stage. Please position text and key graphics away from the seam location.
Copyrightⓒ2025–2026 (C)PLUBER All Rights Reserved.
