Appointment Card Premium Gold 0.19mm Natural Uncoated Business Card Printing

The Korean standard is 90×50mm; the international standard is 85×54mm (credit card size). 90×50 is recommended for domestic transactions, and 85×54 for international meetings and wallet storage. Custom sizes via direct input are available for all lineups excluding PET cards.

Double-sided printing is available, and front-to-back registration tolerance is approximately ±1mm. This is within the industry standard. For orders requiring precise front-to-back design alignment, please secure at least 3mm of inner clearance from the trim line.

Rounded corners are applied at the standard range of R3 to R5mm. R3 provides a soft finish, and R5 provides a distinctly rounded form. Non-standard R values or special shapes are available via die-cutting at a higher unit price than standard rounding.

Foil, embossing, and thermography finishes are applicable on business cards. All finishes should be designed with at least 3mm of inner clearance from the trim line. Edge-adjacent placement may cause foil peeling or embossing distortion. These finishes are not recommended for fine text or thin lines below 1pt.

Gang-Run prints multiple orders on a single plate at a lower unit cost, but ±5–10% color variation may occur. Dedicated-Run prints alone on the press, with less color variation, and on-press review is available. Dedicated-Run is recommended for orders requiring brand color consistency.

Print characteristics vary by paper. Gloss Coated Paper provides gloss and sharp color reproduction; Matte Coated Paper provides a subdued matte finish; rough-gloss provides a textured surface. For orders emphasizing premium quality, specialty papers such as Rendezvous (Natural) or Stardream are recommended; for writing applications, Woodfree is recommended.

For offset printing, single-color (spot or black) 3.5pt and CMYK composite 6pt or larger are recommended. Actual character size varies by font at identical point sizes, so pre-testing is recommended. Sans-serif (gothic) is more stable than serif fonts; 7–8pt is recommended for body text.

Color difference is unavoidable due to the RGB (monitor) and CMYK (print) color system gap. Fluorescent and high-saturation blue tones have limited reproducibility. For orders requiring precise color reproduction, Dedicated-Run with on-press review is recommended. On-press review is restricted for Gang-Run orders.

Matte laminate provides a subdued texture and fingerprint reduction; gloss laminate provides vivid color reproduction and a glossy effect. Both specifications provide wear and fade prevention. Coating application is recommended for business card orders with high exchange frequency.

Without coating, corner wear and color peel may occur during portable use. Concurrent application of laminate and rounded corners reduces wear. Heavier paper of 280gsm or above also exhibits reduced deformation.

Standard paper supports 250–300gsm; specialty paper supports 250–350gsm. Weights of 350gsm or higher are classified under the Extra Premium lineup, providing substantial grip and premium quality. Unit price increases proportionally to paper weight.

The trim line corresponds to the finished size (e.g., 90×50mm); the design size adds 1mm clearance on all sides (92×52mm). Major elements such as text and logos must be placed within 3mm (the safety zone) of the trim line.